DETAILED CONTROLS AND GAUGES 3.2.8 COVER WITH LOCK Opening and Closing Covers with Lock Use the starting switch key to open or close the cover with the lock. For details of the position of the cover with the lock, see Sec- tion "3.3.17 LOCKING". Insert the key securely (6 mm (0.236 in.) from the root of the key), then turn it. If it is turned when partially inserted, the key may break. IN CASE OF TOOL BOX AND CAB DOOR When opening 1. Insert the key into the key slot. 2. Turn the key counterclockwise and pull the cover or door knob to open. When locking 1. Close the cover and insert the key into the key slot. 2. Turn the key clockwise and take the key out.
IN CASE OF ENGINE REAR COVER AND DIRT COVER When opening 1. Insert the key into the key slot. 2. Turn the key clockwise and open the cover. When locking 1. Close the cover and insert the key into the key slot. 2. Turn the key counterclockwise and take the key out. 77