MACHINE OPERATIONS AND CONTROLS 9. Inspection of floor tilt lock bolts. Open the engine rear cover and check that 6 floor tilt lock bolts (1) are tightened properly. If any bolts are loose, tighten them. If there is any up-and-down play in the floor plate, or if clearance (A) is too large (normal: approx. 5 mm (0.197 in)), lock bolts (1) may be broken or loose, so check lock bolts (1). If any abnormality is found, always carry out repairs or ask your Komatsu Utility Dealer to carry out repairs. 89