Vehicle Access and Features 7. Place your right foot on the top step. lower the seat, push the rocker switch down until the seat reaches the desired height. 8. Bring your left foot to the bottom step. 9. Bring your right foot down to the ground, then bring your left foot down to the ground. Fore and Aft Seat Adjustment Move the lever to the left and slide the seat forward or backward to the desired position. Seats Bottom Cushion Front Height IMPORTANT: When adjusting the seats, unless otherwise noted, make all adjustments while seated and before the engine is started.
To adjust the height of the front of the bottom cushion, lift the handle, and pull forward or push back to the de- sired setting. WARNING Lumbar Support Keep hands, tools, and other objects away from the scissor points under the seats. Failure to do so could cause personal injury. Push the rocker switch on the side of the seat up to inflate lumbar support. Push the rocker switch down to deflate lumbar support. National Cush-N-Aire II Seat Back-of-Cushion Height Back Cushion Tilt To adjust the height at the back of the cushion, rotate the lever to the desired setting. To tilt the back cushion, turn the knob and lean forward or backward. See Fig. 2.5 .
Isolator, Optional Height Adjustment Also called a Chugger-Snubber, the isolator is locked out by moving the handle down. To raise the seat, push the rocker switch on the side of the seat up until the seat reaches the desired height. To 2.5