Vehicle Access and Features 09/09/97 f910245 1 2 Fig. 2.14, Cab Lock Handle 09/08/97 f310618 4. Lift the rear part of the cab and let it tip up to the first position. 1. Cab Lock Control 2. Safety Hook Knob near the central pin ( Fig. 2.16 ). The cab can now be pushed forward to the second position. Fig. 2.15, Back of Cab CAUTION To avoid damage to the handle, do not put pressure on the lock handle, or use the handle to lift the cab. To Lower the Cab 5. To tilt the cab to the second position, remove the lower limiting rod triangular support bolt. Place the support bolt in the opening in the arm connection 1.
Make sure the lock indicator is retracted to permit correct cab locking, then push the cab back to the first tilting position. 2.14