Transmissions Fuller Straight-Shift Models General Information 3 5 R 1 N Fuller FS-4205A/B, FS-5205A/B, and FS-6305A/B transmissions have five forward speeds and one re- verse speed. See Fig. 5.1 for the shift pattern. 6 2 4 10/19/2000 10/19/2000 f260085 R 2 4 Fig. 5.2, Shift Pattern, FS-5306A, FS-6306A and FS- 8206A N Operation 5 1 3 1. Always use 1st gear when starting to move the ve- hicle forward. 03/12/96 f260080 Fig. 5.1, Shift Pattern, FS-4205A/B, FS-5205A/B, and FS-6305A/B 2. Accelerate to engine governed speed. Disengage the clutch and move the shift lever to 2nd gear. En- gage the clutch and accelerate to engine governed speed.
Fuller FS-5306A, FS-6306A and FS-8206A transmis- sions have six forward speeds and one reverse speed. See Fig. 5.2 for the shift pattern. 3. Continue upshifting using the same sequence de- scribed in step 2 above. Follow the pattern on the shift lever. These transmissions are designed for use with on- highway, fuel economy engines, where a minimum of shifting is desired and less gear reduction is acceptable. 4. When downshifting, shift progressively down through each successive lower gear as follows: When the engine speed drops to the same rpm to which it fell immediately after upshifting to that 5.1