. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATION WARNING Preparations for Moving the Machine (a): ON position (b): OFF position 3 - 146 Before operati ng the travel lever or travel ped al, check the direction that the t rack frame is facing. When the track frame is facing the rear(when th e sprocket i s at the front), the d irection of operation of t he travel lever and trave pedal is the op posite to the direc tion of move ment of t he machine (forward/reverse, left/right). Before starting the machine off, c heck that the area aroun d th e machine is sa fe, and sound the horn Do not allow a nyone to enter the area around the machine Remove any o bstacles from the t ravel path.
The area at the rear of the machin e is a blind sp ot. Always u se t he r ea r view ca mera to check the area a t the rear of the machine before travelin g in reverse. When the auto -deceleration is be ing used, if th e travel leve r or travel pedal ar e operated, the engine speed will suddenly rise so be careful when operating the travel lever o r travel ped al. . When travelin g, check that the tr avel alarm wo rks properly 1. Set swing l ock switch (1) t o the ON (a ctuated confirm tha t swing lock mon itor lamp (2 ) lights osition and 2. Turn fuel co ntrol dial (3) tow ards the full speed (MAX) position to increase the engine spee d.