Komatsu — Full page photo print

. OPERATION LONG TERM STORAGE LONG TERM STORAGE BEFORE STORAGE NOTICE To protect the hydraulic cylinder piston rod while in storage, keep the work equipment in the posture shown at right. (This prevents rust from developing on the piston rod) DURING STORAGE WARNING moving parts. At the same time, also charge the battery. check the refrigerant level twice a year. When using the machine after long-term storage, do as follows before using it. Wipe off the grease from the hydraulic cylinder rods. Add oil and grease at all lubrication points. 3 - 190 When putting the machine in sto rage for a long time (more than one month), do as follows .

Clean and wash all parts, the n store the machine indoors. If the machine has to be store d outdoors, sele ct level ground and cover the machin e with canvas. This prevents moisture from collecting. before storage. he hydraulic cylinder piston rod with grease. Completely fill the fuel tank. Lubricate and change the oil Coat the exposed portion of t Disconnect the negative termi nals of the battery and cover it or remove it from t he machine and store it sep arately. Lock each control lever and p edal with the lock lever and pedal lock. dal to the lock position on machines ready for attachments.

Set the attachment control pe dal to the lock position on machines ready for a ttachment Set the stop valve to the LOC K position on machines ready for attachments. I nstall the bl ind pl ugs to the elbows. For details of the LOCK a INSTALLATION (PAGE 6-10 nd FREE positions of the stop valve, see "ATTACHMENT REMOVAL AND )". REMOVA To prevent rust, fill with Koma tsu genuine supercoolant (AF-NAC) to give a de nsity of at l east 3 0% for the engine coolant. If it is necessary to perform the rust- prevention operation while the machine is indoors, op en the door s and windows to improve ventilation and prevent gas poisonin g.

During storage, operate and m ove the machine for a short distance once a mo nth so that a new film of oil will coat When operating the work equ ipment, wipe off all the grease from the hydrauli c cylinder rods. If the machine is equipped wit h an air conditioner, operate the air conditioner f or 3 to 5 m inute s once a m onth to ditionercompressor. Always run the engine at lo w idle whe n doin g this. In a ddition, AFTER STORAGE NOTICE If the machine has been stored with out carrying out the monthly rust-prevention operati on, consult your Komatsu di stributor before using it.