. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE (sodium or battery, or there is no display of the UPPER the so with of your 4 - 52 2. the midwa UPPER LEVE L (U.L.) and LOW ER LEVE L (L.L.) lines, r cap (2) and ad d distilled water t o the U.L. 3. After adding d istilled water, tigh ten cap (2 If distilled water is added to above the UPPER LEVEL (U.L use a syringe to lo wer the level to t he UPPE R LEVEL (U.L Neutralize the removed fluid with bak th a large ing soda (s amount of w aker.
bicarbonate), then flush it away wi consult your Kom atsu distributor or battery m When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to check the elec trolyte lev side of the batte ry, check 1. Remove cap ( 2) at the top of the battery, lo ok through the filler port (3) electrolyte doe that the level r line) without fa (A) Suitable (B) Low: El po filler port (3) , and check the electrol yte surface. electrolyte doe s not reach the sl eeve (4), add distilled w that the level r eaches the bottom of the sle eve (UPPER L line) without fa (A) Suitable il. level:
Electrolyte level is up to bottom of s so surfac surface to e tension causes elec bulge and poles appear (B) Low: El ectrolyte level is not up to bottom of slee bent. ) securely. les appear straig ht and not 2. After adding d istilled water, tigh ten cap (2 REMARK If water is added to above the bottom tip of the sleeve, use a to remove electro sodium bicarbona lyte. Neutralize te, then flush it the remo away with water. If necess battery maker. When it is Possible to Use Indicator to Check Electrolyte Lev el If it is possible to use an indicator to check th e electrolyte le vel, follow the instructions give