. MAINTENANCE MAINTENANCE PROCEDURE Adjustment 3. Loosen bolt (1) and bolts (2), then move compressor (3) to adjust. is 4 - 56 1. Remove the co 2. Loosen bolts (1 Compresso r (3) is installed to bracket (4), so when b olts (1) oosened, it becomes possible to move bracket mounting positio n of bolt (2) a s the fulcrum. 4. bolts (1) and (2 ) to hold it in position. 5. Install the cove ermined, tighten NOTICE Check each pulley for damage, wear o f the V-groove, and wear o f the V-belt. I n particular, be sure to check that the V-belt is not touching the botto m of the V-groove. sk the Komatsu distributor in your territory to replace the belts with new ones. little allowance for adjustment.
d coming from the belt. t after one hour of operation. In case any of the following occurs, a sk th e Komats u distribut or in your territory to replace the bel ts with new ones. • The fan belt has elongated, leaving little allowanc e for adjustmen • A cut or crack is found on the belt. • Slipping or crea king sound is hear d coming from When the new V-b elt is set, readjust i t afte r one hou