. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT HYDRAULIC CIRCUIT One Line Attachment provided by the confer with each subsequent 10 the attachment NOTICE procedure for the and wait for at least 5 minutes before starting 6 - 9 Hydraulic Circuit Con When c onnecting the atta chment, connect the hy draulic circuit as 1. Che ck that the stop va lve is at the LOCK positi the plug. Be c areful not to lose or damage any part tha t is removed. 2. Connect the piping attachment maker. The dimensions on th e stopper valve side ar right. For those on t manufacturer of attac he attachment side, c hment and determine. 3.
Afte 1) r connecting the p Start the engine, r iping, bleed the air from eferring to "STARTING 2) 3-129)", and run it at low idle for the minutes. Then pro ceed to the next work. 2) Run the engine a t low idle until the air in circuit is complete ly removed, then operat pedal repeatedly ( approx. 10 times) to ble I f th e at attachme nt itself, follow the specified procedure to ble 3) operations. This w ill release the bubbles i n the oil insid e th 4) Check that there i s no oil leakage, and wi pe off any oil that