OPERATING THE ENGINE STARTING THE ENGINE (1) Gear-locked parking brake lever (A) “Pull to parking position” (1) Shuttle shift lever (2) Main gear shift lever (F) “FORWARD” (N) “NEUTRAL POSITION” (R) “REVERSE” IMPORTANT : Bring the tractor to a complete stop before applying the gear-locked parking brake lever. 4. Place the PTO clutch control switch in the position and hydraulic control levers in the “LOWEST” position. NOTE : In moving the gear-locked parking brake lever, you may feel it heavy sometimes, or light at other times. This is normal. 2. Make sure the fuel shutoff-valve is in the position. (1) PTO clutch control switch (2) Position control lever (3) Draft control lever (A) (B) 5.
Set the throttle lever at the minimum speed position. (1) Fuel shutoff-valve (A) “CLOSE” (B) 3. Place the shift levers in “NEUTRAL” position. (1) Hand throttle lever “INCREASE” “DECREASE” 44 M5091,M5111