DRIVING - Engine Operations minutes. Level 1 (Red) Following Distance Alert collision. At this point, the information display will change from Collision Alert to Collision Alert BRAKE! The warning is active when the driver must take immediate evasive action by applying more braking power and/or steering clear of the vehicle ahead to avoid a potential collision. Level 3 (Green) Following Distance Alert WARNING Following Distance 4 Increase Gap to Level 2 (Yellow) Following Distance Alert Vehicle Ahead The system can also detect stationary objects in the vehicles path. The operator needs to take control of the vehicle to avoid the stationary object.
The icon will be accompanied with a pop-up message but no audible sound. This warning is active when the following distance is less than what is set in the system. This warning tone is the most severe following distance alert. Brake Command Warning Active Cruise and Braking (ACB) Fault Alert This warning is active when the following distance is less than what is set in the system. This warning is more severe than the Level 3 Following Distance Alert. The system first displays the Collision Alert so that the driver can address the situation without the system using foundation brakes.
If the brakes are not engaged by the driver, the system will attempt to slow the vehicle by applying the brakes to assist the driver in reducing the severity of or potentially avoiding a This warning is presented to alert the operator that the Adaptive Cruise system is malfunctioning and will be disabled. The operator will need to resume control of the vehicle’s throttle and brakes. The system 138 Y53-6047-2HEN (03/18)