SAFETY - Cab Access 1 How to lock and unlock the cab doors Information on locking your vehicle. Remote Keyless Entry Remote Keyless Entry (RKE) option is a system that adds security and convenience to your vehicle. The system will lock or unlock cab doors with the key fob. The system will alert you with parking lights when the selected doors are locked or unlocked. The system includes two key fobs that provide secure rolling code technology that prevents someone from recording the entry signal. dio certification number only signifies that Industry Canada technical specifi- cations were met. The vehicle has one key for cab doors, ignition, and the optional sleeper luggage compartment.
Frame-mounted tool box locks and locking fuel tank caps each have separate individual keys. The key fob uses one CR2032, 3V battery. Batteries should last approximately three years, depending on use. Consistently reduced range is an indicator that the battery needs replacement. Batteries are available at most discount, hardware, and drug stores. The battery can be accessed by removing the cover of the key fob. After a new battery is installed, the key fob must be synchronized with the vehicle. WARNING To help lessen the chance and/or se- verity of death or personal injury in case of an accident, always lock the doors while driving.
Along with using the lap shoulder belts properly, locking the doors helps prevent doors from in- advertently opening and occupants from being ejected from the vehicle. NOTE FCC ID: L2C0031T IC: 3432A-0031T FCC ID: L2C0032R IC: 3432A-0032R This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions (1) This device may not cause harmful interfer- ence, and (2) This device must accept any interference received, including in- terference that may cause undesired operation.
Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term IC: before the ra- How to replace key fob battery How to replace the battery in the key fob If the key fob will not unlock the doors, replace the battery. 1. Remove the cover of the key fob. 2. Replace the battery and dispose of the old battery. 3. Synchronize the key fob with the vehicle. To lock or unlock the doors from outside the cab: 1. Insert the key in the lock. 2. Turn the key toward the rear to lock of the vehicle (clockwise); forward (counter clockwise) to unlock. 14 Y53-6047-2HEN (03/18)