PACCAR 579, 567 — Maintenance Schedule

MAINTENANCE - Maintenance Schedule 5 178 Y53-6047-2HEN (03/18) System Component Task I A B C D E Front Axle Total Vehicle Alignment Check and adjust as required. • • Steering Knuckle Spindles, Thrust Bearings, Kingpins, Drawkeys, Tie Rod Ends, Steering Stops, and Bushings. Inspect for wear and damage and endplay. Shim or replace as required; see Front Axle and Suspension on page 248. • Kingpin Bushings, Thrust Bearings, and Tie Rod Ball Ends Lubricate with approved grease. • Drawkeys Tighten nuts • • Front Axle (Dana) Total Vehicle Alignment Check and adjust as required. • • Kingpin Bushings, Thrust Bearings, and Tie Rod Ball Ends (ON HIGHWAY) Lubricate with approved grease.

• Kingpin Bushings, Thrust Bearings, and Tie Rod Ball Ends (OFF-HIGHWAY) Lubricate with approved grease. • Steering Knuckle Spindles, Thrust Bearings, Kingpins, Drawkeys, Tie Rod Ends, Steering Stops, and Bushings (ON HIGHWAY) Inspect for wear and damage and for endplay. Shim or replace as required. • Steering Knuckle Spindles, Thrust Bearings, Kingpins, Drawkeys, Tie Rod Ends, Steering Stops, and Bushings (OFF-HIGHWAY) Inspect for wear and damage and for endplay. Shim or replace as required. •