PACCAR 579, 567 — Maintenance Schedule

MAINTENANCE - Maintenance Schedule 5 Y53-6047-2HEN (03/18) 185 System Component Task I A B C D E Drum Brakes (All) Slack Adjusters Check the push rod travel and check the control arm for cracks. Adjust at reline; see Auto Slack Adjuster on page 215. • Lubricate (NLGI #2 grease). • Brake Camshaft Bearing Check for excessive camshaft play in the axial and radial directions. Max allowable play is 0.003 in. Lubricate (NLGI #2 grease). • Brake Treadle Valve Clean the area around the treadle, boot, and mounting plate. Check the pivot and mounting plate for integrity. Check the plunger boot for cracks. Lubricate roller pin, pivot pin, and plunger (NLGI #2 grease).

• Brake Air System Check air lines and fittings for leaks; see How to Check for Air System Leaks on page 212. Adjust routing as required to prevent chafing. Check tank mounting and condition. • Clean or replace the inline filters. • Brake Lining Inspect: replace as required. •