PACCAR 579, 567 — Maintenance Schedule

MAINTENANCE - Maintenance Schedule 5 Y53-6047-2HEN (03/18) 187 System Component Task I A B C D E Hub, Drum, and Hubcap Hubs (non-LMS) Check the bearing endplay and adjust as required; see Wheels on page 264. • Hubs (non-LMS) with Outrunner Seals Clean the components and check for excessive wear or damage. Change the oil and seal; see Wheels on page 264. • Hubs (non-LMS) with Standard Seals Clean the components and check for excessive wear or damage. Change the oil and seal; see Wheels on page 264. • Hub Seals (all) Check for leaks: replace as required. • LMS Hubs (Dana) Inspect for leaks. Check the bearing endplay and adjust as required; see Wheels on page 264.

• LMS Hubs (Dana) with Synthetic Lubricant Service the bearings, seals and oil. This interval may be different depending on the results of the regular inspection. See Wheels on page 264. 500,000 miles/ 800,000 km LMS Hubs (Dana) with Mineral Lubricant Service the bearings, seals and oil. This interval may be different depending on the results of the regular inspection. See Wheels on page 264. 350,000 miles/ 560,000 km