MAINTENANCE - Maintenance Schedule 5 190 Y53-6047-2HEN (03/18) System Component Task I A B C D E Auxiliary Transmission Cotta Transfer Case TR2205 Fabco Transfer Case TC142/TC143/TC170/ TC270 Marmon-Harrington Transfer Case MVG2000/MVG2000SD Inspect: Check oil level, inspect for leaks and any visible damage. • Initial oil change: Drain oil while warm: flush case with gear oil-compatible fluid, clean magnetic drain plug, and refill. Do not flush the case with any solvent. • • Change oil. • Air Intake Air Intake Piping, Mounting, and Charge Air Cooler Check the system for broken pipes, leaks, joint integrity, cleanliness, and proper support; see Air Intake System on page 242.
• Air Cleaner Replace the engine intake air cleaner element. When required by air restriction indicator or required by the engine manufacturer's operator manual. Clutch Clutch Hydraulic Fluid Replace fluid and bleed system. 240,000 miles/384,000 km or 2 years, whichever occurs first. Clutch Release Bearing Lubricate. • Inspect and adjust when necessary (no adjustment required for SOLO type clutches) •