PACCAR 579, 567 — Cab Maintenance

MAINTENANCE - Cab Maintenance spotting, wipe aluminum surfaces dry after washing. Under corrosive conditions, such as driving on salted roads, clean aluminum parts with steam or high pressure water from a hose. A mild soap solution will help. Rinse thoroughly. To maintain the tailpipe quality finish, wash the tailpipe with a soft cloth, mild soap and water or glass cleaner. A non-abrasive chrome polish can be used sparingly on hard to clean areas. Do Not clean your high heat chrome using scouring pads, abrasive chrome polish, highly acidic chemical cleaners or any other abrasive cleaners.

Even high quality stainless steel parts can rust under prolonged exposure to salt water, especially when the salt-laden moisture is held against the metal surface by road grime. It is, therefore, important to frequently clean salty moisture and grime from stainless steel surfaces. If surface rust is encountered, wash the surface and use a commercial polishing compound to clean off the rust, followed by a coating of wax. Never use steel wool when cleaning stainless steel because minute particles of the steel wool can embed in the surface of the stainless steel and cause rust staining.

Cleaning Interior Vinyl and Upholstery NOTE Weather Stripping Frequent washings of the vehicle are required to remove grime and contaminants that can stain and oxidize paint and accelerate corrosion of plated and polished metal surfaces. Waxing offers added protection against staining and oxidation. But to allow enough time for your truck's finish to cure, wait about 30 days after the date of manufacture before waxing. Do not apply wax in the hot sun and do not friction burn the paint with a buffing machine. Occasionally spray weather-stripping on doors and windows with silicone compound to help preserve resiliency.

This is especially useful in freezing weather to prevent doors and windows from sticking shut with ice. Strong cleaning agents such as hand sanitizer, solvents, paint thinners, win- dow cleaner and gasoline/ diesel fuel must never be used on your vehicle's interior.Repeated exposure to chemi- cals such as sunscreen, insect repel- lents containing DEET, or brake fluid may cause accelerated wear, tacki- ness or discoloration of interior surfa- ces. 5 Wipe vinyl upholstery and lining with a good commercial upholstery cleaner. Do not use acetone or lacquer thinner. Clean fabric upholstery with upholstery shampoo specially formulated for this purpose.

First remove loose dirt, dust or debris with a vacuum cleaner. Use a soft brush to loosen caked on dirt before vacuuming it away. Wipe the fabric surface with a slightly damp cloth and dry the seat fabric thoroughly. If the fabric is still dirty, wipe using a mixture of mild 218 Y53-6047-2HEN (03/18)