MAINTENANCE - Cab Maintenance soft brush made for automotive cleaning. Use cool or warm water and a mild, household type soap. Strong industrial detergents and cleaning agents are not recommended. Do not use stiff brushes, paper towels, steel wool, or abrasive cleaning compounds because they will scratch painted, plated, and polished metal surfaces. 3. Rinse surfaces frequently while washing to flush away dirt that might scratch the finishes during the washing operation. 4. Hose dirt and grime from the entire chassis. sure to clean any area where mud and other debris can collect. Sediment packed in closed areas of the frame should be loosened before being flushed.
If desired, your dealer can do this service for you. 5. Wipe everything dry with a chamois to avoid water spots. To prevent water spotting, dry off the cosmetic surfaces with a clean cloth or chamois. 6. Remove road tar with an automotive type tar remover or mineral spirits. 7. After cleaning and drying, apply a quality automotive wax. CAUTION DO NOT aim the water jet directly at door locks or latch. Tape the key holes to prevent water from seeping into the lock cylinders. Water in lock cylinders should be removed with compressed air. To prevent locks from freezing in the winter, squirt glycerin or lock deicer into the lock cylinders.
5 NOTE To allow enough time for your truck's finish to cure, wait at least thirty days after the date of manufacture before waxing. Care of Display Screens on the Dashboard From time to time it may be necessary to clean the display screen. If an oil leak develops, you will be able to detect it easier. Corrosive materials used for ice and snow removal and dust control can collect on the underbody. If these materials are not removed, accelerated corrosion (rust) can occur on underbody parts such as fuel lines, frames, floor pan, and exhaust system, even though they have been provided with corrosion protection. At least every spring, flush these materials from the under body with plain water.
Be 1. Begin by spraying water over the dry surface to remove all loose dirt before applying the car wash and wax solution. Do not wash the vehicle in direct sunshine. Do not spray water directly into the cab vents. 2. Using soapy water, wash the vehicle with a clean soft cloth or a To clean the screen, dampen a clean, soft, lint-free cloth with water only. A mild glass cleaner that does not contain alcohol or ammonia may also be used. Cleaners that contain alcohol and/or ammonia will eventually dry-out, crack and "yellow" the screen. Wipe the screen gently back and forth. You can also use a commercial 220 Y53-6047-2HEN (03/18)