MAINTENANCE - Electrical System 4. Find the lock ring for the headlamp bulb holder, twist counter clockwise to loosen and pull out the holder and bulb have an authorized dealership aim the headlights. Fuses, Circuit Breakers and Relays Fuse information for both cab and sleeper. WARNING Fuses, circuit breakers, and relays are located in the Power Distribution Center (PDC) to the left of the steering column, behind the clutch pedal. Additional fuses are located in the engine compartment (driver’s side firewall) and also in the sleeper (driver’s side of vehicle) under the bunk storage compartment.
Refer to the fuse labels affixed at each fuse panel location (generally under the fuse panel cover) for information about the location and amp ratings of each circuit. Optional HID headlights have high voltage circuits and should only be serviced by a trained technician. At- tempting to service the HID ballast without proper training may result in severe electrical shock which could lead to death or personal injury. 5 Do not touch the surface of the light bulb. The glass could become contaminated and cause bulb failure. Vehicle Light Bulb specifications Aiming Headlights Please have an authorized dealership aim the headlights.
The headlights were properly aimed at the factory to meet safety specifications. If the headlights need to be adjusted, please 230 Y53-6047-2HEN (03/18) Bulb Location Type of Bulb Notes High Beam Halogen HB3A – LL (long life version not required) Daytime Running Lamp/ Position Lamp/Turn Signal/ Side Marker 4157K (SAE), 3157K (ECE) Rear tail light/ Turn Signal N/A LED lighting Interior map/ dome/ indirect light N/A LED lighting Bulb Location Type of Bulb Notes Low Beam Halogen H11-LL (SAE), H7 (ECE) (long life version not required) Low Beam HID D1-S