MAINTENANCE - Heater and Air Conditioner Maintenance Suspension U-Bolts It is important that U-bolts remain tight. Severe use of your vehicle will cause them to loosen faster. But all vehicles need to have their U-bolts checked and tightened regularly. Be sure someone with the proper training and the right tools checks and tightens the U-bolts on your vehicle. New springs can settle in after service, relieving the tension on the U-bolts. Loose U-bolts can cause leaf spring breakage, axle misalignment, hard steering and abnormal tire wear. All vehicles should have suspension U-bolts tightened after the first 500 miles (800 km) of operation.
Re-torque the front spring pinch bolts and shackle pinch bolts. comply may result in death, personal injury, equipment or property damage. death, personal injury, equipment or property damage. U-bolts are difficult to tighten unless you have the right equipment. If you cannot tighten them correctly yourself, be sure to have them checked and tightened regularly by an authorized mechanic. Tighten U-bolt nuts to the specified torque value with the vehicle loaded to its normal gross weight.
See Suspension U-Bolts, Grade 8 on page 276 specifications for torque values applying to U-bolts and nuts, with clean threads lubricated with Chevron zinc lubricant (SAE 20 or 30 oils acceptable but not preferred). Related reference Heater and Air Conditioner Maintenance Important information to know about maintaining the air conditioner. 5 The combination heater-air conditioner provides comfort for those in the cab through accurate control of the cab environment in all weather conditions. Regular attention to the items below will help you keep the heater-air conditioner unit running well. Keep the vehicle's ventilation system, engine exhaust system and cab joints properly maintained.
It is recommended that the vehicle's exhaust system and cab be serviced as follows: Inspected by a competent technician every 15,000 miles Whenever a change is noticed in the sound of the exhaust system Whenever the exhaust system, underbody or cab is damaged WARNING WARNING Do not operate the vehicle if the sus- pension U bolts are not properly tight- ened. Loose U bolts will cause the axle to not be properly secured to the suspension, which could cause loss of vehicle control and an accident. Loose U bolts can also cause uneven tire wear and poor alignment. Failure to Do not replace U bolts and nuts with common U bolts or standard nuts. These parts are critical to vehicle safe- ty.
If the wrong U bolts or nuts are used, the axle could loosen or sepa- rate from the vehicle and cause a seri- ous accident. Use only U bolts and nuts of SAE Grade 8 specification or better. Failure to comply may result in 250 Y53-6047-2HEN (03/18)