MAINTENANCE - Wheels grooves may lead to cracks in the disc, and can cause it to fail. Hub Piloted Disc Wheels This is a job you may not be able to do yourself. You need the right torquing equipment to do it. For safe, reliable operation and adequate service life, your wheel bearings must be adjusted properly at the recommended intervals. Contact your authorized dealer to make sure the wheel bearings are properly adjusted. Wheel Bearings Stud Piloted Disc Wheels 5 Tightening Wheel Cap Nuts Tightening sequence for hub and stud piloted disc wheels. WARNING Tighten wheel cap nuts properly.
If they are not tightened properly, wheel nuts could eventually cause the wheel to become loose, to fail, and/or to come off while the vehicle is moving, possibly causing loss of control and may result in death, personal injury, equipment or property damage. Proper wheel torque can best be obtained on level ground. Install lug nuts and finger- tighten in the numerical sequence as shown below. This procedure will ensure that the wheel is drawn evenly against the hub. Contact an authorized dealer for information on the proper installation procedure for the wheels on your truck. 266 Y53-6047-2HEN (03/18)