MAINTENANCE - Specification Reference Charts Related concepts Standard and Metric Fastener Torque for Grade 8 U-Bolts Rear Suspension Fasteners Torque requirements for rear suspension fasteners, including standard and metric fasteners. Torque requirements apply to manufacturer proprietary suspensions. All other suspensions must refer and adhere to original manufacturers shop manual. 5 Related concepts Suspension U-Bolts, Grade 8 Torque specifications for suspension u- bolts. Tighten all U-Bolts with a torque wrench. Torque specifications apply to the following fasteners with lightly lubricated threads. Chevron Zinc Lubricant or SAE 20/30 oil should be used on U-Bolt threads.
Torque requirements apply to manufacturer proprietary suspensions. All other suspensions must refer and adhere to original manufacturers shop manual. The values shown here are for suspension u-bolts and should not be applied to bolts and fasteners for the frame.
276 Y53-6047-2HEN (03/18) Metric Fastener Size (with nylon insert nuts) Tightening Specification lb-ft (N•m) M16 120-160 (163-217) M20 260-340 (352-460) M20 (All Metal Lock Nuts) 315-350 (427-475) U-Bolt Size Diameter (inches) Torque (N•m) Torque ( lb- ft) 3/4 333-408 245-300 7/8 598-734 440-540 1 925-1,060 680-780 1 1/8 1,470-1,660 1,080-1,220 1 1/4 1,890-2,120 1,390-1,560 1 1/2 3,130-3,860 2,300-2,840 M20 475 +/- 27 350 +/- 20 SIZE/TYPE TORQUE N•m Lb-Ft M16 nylon- insert nuts 163-217 120-160 M20 nylon- insert nuts 352-460 260-340 M20 all- metal lock nuts 427-475 315-350 1/2 in. nut 109-122 80-90 3/4 in. nut 394-462 290-340 1-1/4 in. nut 1,877-2,217 1,380-1,630