PACCAR 579, 567 — Vehicle Identification Labels

INFORMATION - Vehicle Identification Labels Paint Identification Label indicates the date of manufacture and other pertinent information, is located on the driver’s side door edge or on the driver’s side door frame. NOTE The Paint Identification Label contains the paint colors used by the factory to paint your vehicle. It lists frame, wheels, cab interior and exterior colors. This label is located inside the glove box. GVW is the TOTAL SCALE WEIGHT the vehicle is designed to carry. This includes the weight of the empty vehi- cle, loading platform, occupants, fuel, and any load. Component Identification Each of the major components on your vehicle has an identification label or tag.

For easy reference, record component numbers such as, model, serial, and assembly number. Federal Safety Standard Certification Label Noise Emission Label The NHTSA regulations require a label certifying compliance with Federal Safety Standards, for United States and U.S. Territories, be affixed to each motor vehicle and prescribe where such label may be located. This certification label, which The Noise Emission Label is located in the driver's side door frame. It contains information regarding U.S. noise emission regulations, chassis number, and date of manufacture. 6 Y53-6047-2HEN (03/18) 281 Engine: For further information, please refer to the Engine Operation and Maintenance Manual.

Transmission: For both manual and automatic transmissions, the identification number is stamped on a tag affixed to the right rear side of the transmission case. Clutch: Enclosed in clutch housing. Location depends on manufacturer. Steer Axle: The front axle serial number is stamped on a plate located on the center of the axle beam. Axle Specification Number: Usually stamped on the right rear side of the axle housing. This number identifies the complete axle. Axle Housing Number: Usually located on the left forward side of the housing arm. This tag identifies the axle housing.