CONTROLS - Driver Information Display the back button is held for 2 seconds the screen will turn off 5. Cruise Control Indicator 6. Automated Transmission & Shift Indicator Area 7. Header 8. MCS Knob Cue 9. Main Content Window Clock alarm sounds Driver or passenger door is opened Hazard warning lamp switch is ON Service brake switch is ON Tractor marker lamp switch is ON Trailer marker lamp switch is ON Low Voltage Display not active and the screen has not been put into "Display Off Mode" In addition to a blank screen, the following are menu items and the information available within each menu selections.
3 WARNING Driver Information Display Do not look at the Instrument Cluster Display for prolonged periods while the vehicle is moving. Only glance at the monitor briefly while driving. Failure to do so can result in the driver not being attentive to the vehicle’s road position or situation, which could lead to an ac- cident and possible death, personal in- jury or equipment damage. The Driver Information Display, located at the top of the instrument cluster. NOTE Some Driver Information Display func- tions are only accessible when the ve- hicle is parked. Other functions are ac- cessible while the vehicle is moving or when parked. Each function is identi- fied in the following descriptions.
The display communicates important vehicle information through a constant monitoring of systems when any of the following conditions are met: Ignition key in ON or ACC positions Ignition timer is active The Menu Control Switch (MCS) button is pushed or spun (independent of ignition key switch position) Navigation of the system is organized into three levels of functions. The first level of organization is identified as "Trunk" level functions. The second level is identified as "Branch" level functions. The lowest level of functions are identified as the "Leaf" level functions. Some screens will appear 1. Odometer/Trip Odometer 2. Outside Air Temperature 3. Clock 4.
Active Warnings 66 Y53-6047-2HEN (03/18)