CONTROLS - Virtual Gauges the tires and display the information accordingly. When scrolling through each tire’s information, the relevant tire will appear highlighted in the menu screen. A warning message will appear if the system detects a tire temperature or pressure that is outside of normal parameters. This information is only available when parked gauges and push to select the desired gauge to view. Trip Info: Ignition Timer Avg = 58 mph 6.8 MPG 3 _ Avg + 12:39 PM 78 F 25,326 Mi Virtual Gauges IgnitionTimer: Push Then Spin The virtual gauges function is selected through the rotary knob and is available in both parked and driving modes.
To Set Timer It shows Average Speed, Average Fuel Economy, and a dynamic instantaneous indication of fuel economy above or below the current average. The screen is available when driving. Average fuel economy is computed by the fuel consumed during the trip (see the next section for Trip information). The fuel economy for a trip will be reset when that trip odometer is reset. 12:39 PM 78 F 25,326 Mi Gauges: Tach 1350 RPM This function allows the driver to set a timer to shut off the truck. This feature is only available when the vehicle is parked. After the timer is set, the ignition key may be turned to the off position and removed. The engine will continue to run for the programmed time.
SweetSpot 12:39 PM 78 F 25,326 Mi Trip Information Fuel Economy This function allows you to keep trip information data on up to four separate trips – labeled A, B, C, and D. Trips are also selectable as “Active” or “Inactive” so you can use the data logging function to Virtual gauges provide dynamic information about the vehicle's performance. Spin the button to scroll through the available This function displays the dynamic fuel economy performance of the vehicle. 70 Y53-6047-2HEN (03/18)