CONTROLS - Guide to the Warning Symbols Low Voltage Disconnect (Optional) Set voltage threshold for disconnect How to Set Clock Display Format Use these steps to switch between 12 hr or 24 hr time display format. 2. Press the to select the item to change. 3. Rotate the knob to change the hour. Press the . 4. Rotate the knob to change the minutes. Press the . 5. Rotate the to toggle AM/PM. Press the . 6. Press the button above the to Exit. Anti-Theft (Optional) Enable/disable anti theft function When in the Settings Menu, 1. scroll through the list of menu items to “Format”. 2. Press the to toggle between either 12 hour (AM/PM) or 24 hour (military) time.
3 Driver Information Display Alarm On/Off When in the Settings Menu, 1. Scroll through the list of menu items to “Alarm”. 2. Press the to enter the alarm menu. 3. Press the to turn the alarm ON or OFF. How to set the Driver Information Display clock These steps will help set the home, local or alarm time in the display Anti Theft Menu This menu selection allows the operator to turn the antitheft feature on or off. With the anti theft feature turned off, the operator will not need a passcode to start the engine. - Format: 12 hr . Time: Home Alarm: Settings: Spin then Push Settings: AlarmTime The default passcode is set to 0000 at the factory.
Please see an authorized dealer if a custom passcode is needed. Off Units: Standard 06 :00 am Guide to the Warning Symbols 12:39 PM 78 F 25,326 Mi 12:39 PM 78 F 25,326 Mi Information and color of warning symbols. 1. When in the Settings Menu, scroll through the list of menu items. The warning lights and audible alarm may indicate a system malfunction. Check the lights frequently, and respond properly as 74 Y53-6047-2HEN (03/18)