. OPERATION TROUBLESHOOTING TROUBLESHOOTING 3 - 127 AFTER RUNNING OUT O When the dump truck has run out of fuel, fill the fuel tank with fuel, bleed air from the fue l system and sta rt up the engine again. For an air bleeding method, se IF TRANSMISSION HAS If the transmission has any trou to the following procedure. 1. Decelerate the machine w place. 2. Set the gear shift lever to ith the brake and stop it on a safe the N position, then set the parking NG position. e gear is not shifted even if the gear llowing procedure. tch is at the ON position or the engine is started, disconnect (pull out) emergency brake switch to the PARKI 3. In some trouble modes, th shift lever is operated.
In this case, perform the fo 1) When the starting swi connector (1) (No. A1 2) Set the parking brake 3) Operate the gear shift ergency (female), A1 (male), white 1-pin connector), th en connect lever to move the machine to a safe p lace with out depress ing the accelerat or pedal. If the gear shift lever is operate d with the accelerator pedal depresse d, the em ergency esc ape function will n ot work. In addition, the emergency es cape function may not work for some failure c odes. While the emergency escape f unction is working, the shift indicator o f the mac hine monitor displays "E" and the shift range (gear speed) of the tran smission alternately.
METHOD OF LOWERING DUMP BODY IN EMERGENC Y When the dump body needs t