. MAINTENANCE SERVICE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING CLEAN TRANSMISSION CASE STRAINER WARNING Drain the oil from the transmission case before starting the operation. For details, see "CHANGE OIL IN TRANSMISSION 4 - 82 The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down be fore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure, then remove it caref ully. 1. Remove plu g (1) of the strainer (2 places wheel. 2. Take the st clean diese 3.
Assemble t he strainer to strainer case (2), then in stall p lug ( 1). the f ront left The parts and oil are at high temperature after th e engin e is stopped , and may cause serious burns. Wait for the temperature to go down be fore starting the operation . If there is still p ressure remaining inside t he case , the oil or plug may fly out. Turn the plug slowly to release the pressure, then remove it caref ully. Sectio 4-70)" 1. Remove bo strainer. lt (1), then remove cover (2) and take out the the 2. Remove an y dirt stuck to the strainer, then wash i n clea n diesel fuel or flush 3. Install the s ing oil. If the strainer is trainers in their original damaged, replace it. position.