. SAFETY GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE EMERGENCY EXIT FROM OPERATOR'S CAB Machines equipped with a cab have doors on the left and right sides. If the door on the one side does not open, escape from the door on the other side. your Komatsu distributor for modifications will this may lead to an 2 - 17 DO NOT GET CAUGHT IN ARTICULATING PORTION AND DUMP BODY If the clearance at the articulating portion changes and you get caught in it, you will suffer serious personal injury or death. Do not allow anyone to come inside the articulation range. The clearance in the area around the dump body changes according to the movement of the dump body.
If you are caught, there is danger that you will suffer serious injury or death. Do not allow anyone near any of the rotating or telescopic parts. If the clearance at the artic ulating portion changes and you g caught in it, you will suffer not allow anyone to come serious personal injury or death. D inside the articulation range. The clearance in the are a around the dump body chang according to the movement of the dump body. If you are caug there is danger that you will suffer serious injury or death. Do not allow anyone near any of the rotating or telescopic part t of the dump body. If you are caug ill suffer serious injury or death.
any of the rotating or telescopic part PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES The operator's compartment is equipped with a structure (ROPS, FOPS) to protect the operator by absorbing the impact energy. If the machine weight (mass) exceeds the certified value (shown on the ROLL-OVER PROTECTIVE STRUCTURE (ROPS) CERTIFICATION plate), ROPS will not be able to fulfill its function. Do not increase machine weight beyond the certified value by modifying the machine or by installing attachments to the machine. Also, if the function of the protective equipment is impeded, the protective equipment will not be able to protect the operator, and the operator may suffer injury or death.
Always observe the following. If the machine is equipped with a protective structure, do not remove the protective structure and carry out operations without it. If the protective structure is welded, or holes are drilled in it, or it is modified in any other way, its strength may drop. Consult your Komatsu distributor before carrying out any modifications. The operator's compartment is equipped with a structure (ROP FOPS) to protect the operat or by absorbing the impact energy.
the machine weight (mass) e xceeds the certified value (shown o the ROLL-OVER PROT ECTIVE STRUCTURE (ROP CERTIFICATION plate), RO PS will not be able to fulfill its functio Do not increase machine w eight beyond the certified value modifying the machine or by i nstalling attachments to the machin Also, if the function of the p rotective equipment is impeded, th protective equipment will not the operator may suffer inj following. If the machine is equippe remove the protective stru it. cture and carry out operations witho If the protective structure i s welded, or holes are drilled in it, it is modified in any other your Komatsu distributor b way, its strength may drop.
Cons efore carrying out any modification If the protective structure is damaged or deformed by falling o bjects or by rolling over, its stre and it will not be able to fu advice on the method of r lfill its function properly. In such c Even if the protective stru If you do not fasten your s eatbelt properly, it cannot display it UNAUTHORIZED MODI FICATION Komatsu will not be respo nsible for any injuries, accidents, pr oduct failures or other propert from modifications made w ithout authorization from Komatsu . Any modification made wit hout authorization from Komatsu can create hazards. Before m ributor. capacity of the dump body or make any other modifications. Su an create hazards.
Before m consult your Komatsu dist Do not try to increase the capacity of the dump body or mak cause a drop in the brakin unexpected accident. g efficiency, the balance of the machine will become poor, and