hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

OPERATING MACHINE Using Rubber Crawler Rubber crawlers are designed to allow the machine to travel without damaging road surfaces such as paved road surfaces. Avoid damage to the rubber crawlers by following the precautions below: Forbidden Operations 1. Do not operate or steer the machine on or near river- terrace, boulder and boulder mixed ground, crushed- stone ground, uneven hardpan surfaces, stumps, reinforcing bars, scraps, and steel plate edges. Failure to do so may shorten the service life of the rubber crawlers to a great extent. 2.

Do not leave engine oil, fuel, and other kinds of M1M7-05-015 lubricants remaining on the rubber crawlers, and avoid traveling on road surface covered with oil to reduce the danger of sliding. 3. Do not travel the machine while raising one side crawler off the ground with the front attachment. Shear or damage to the rubber crawler may result. Precautions for Using Rubber Crawlers d WARNING: The rubber crawler machine is less stable than the steel crawler machine, as the edge of the rubber crawler is easier to deform more than steel crawler. Pay attention when operating the machine at an angle to the tracks. 1.

Do not store the rubber crawlers in a place where they will be exposed to direct sunlight for a period of more than three months. 2. Avoid unnecessary steering operations on concrete roads, possibly resulting in premature wear of shoe lugs and core metals. Also, avoid operating the machine on high temperature [over 60 °C (140 °F)] road surfaces during asphalt pavement work, possibly causing premature wear of the rubber crawlers as well as damage to the road surface. M1M7-05-016 5-17