MAINTENANCE ZX27-3 1. Loosen nut (2) to remove cover (2). 1 2. Loosen bolt (3) to remove cover (4). 2 3. Loosen mounting bolts (6) of alternator (5). 4. Move alternator (5) to correctly adjust the fan belt 5. Securely tighten bolts (6). tension. 6. Install cover (4) and (1) in the reverse order of above M1NC-07-031 steps (2 and 3). IMPORTANT: When a new belt is installed, the new belt is difficult to be correctly seated from the beginning. Be sure to readjust the tension after operating the engine for 3 to 5 minutes at slow idle speed. 3 4 M1NC-07-032 5 M1NC-07-033 6 5 6 M1M7-07-047 7-55