OPTIONAL ATTACHMENT AND DEVICE Method of Changing Password Cancel the registered password, and set a new password. 1 1. Turn the key switch (1) ON. 2. Unlock the numeric keys. 3. Push Key F (2) and Key 1 (3) simultaneously for more than 2 seconds. 4. The two indicators (4) and (5) flicker simultaneously, and the buzzer sounds. M1M7-01-007 5. Input the new 4-digit password. After inputting, two indicators (4) and (5) are lit, and the buzzer sounds twice. 2 3 6. Once again, input the password to be newly registered. (the same password as that in Item 5) When properly inputted, the two indicators (4) and (5) flicker, and the numerals of the new password are lit in turn.
After flickering of the new password, if Key C (6) is pushed, indication of the password inputted again can be indicated. M1M7-OP1-01-004 (IMPORTANT: Registration is not made at this stage.) 4 In case the buzzer sounds eight times, and the two indicators (4) and (5) alternately flicker, the input is mistaken. Redo beginning with Item 3. 7. Push Key F (2) for more than two seconds. The buzzer sounds three times, and the password is registered. This completes registration. The password is effective from the next input. 5 f NOTE: In case Key C (6) is pushed in the change mode M1M7-OP1-01-005 condition, redoing is possible from Item 4.
And in case changing the password needs to be cancelled, turn the key switch (1) OFF. 4 2 6 5 M1M7-OP1-01-005 13-5