OPERATOR'S STATION AM/FM Radio Operation (Cab Equipped Machine, When Genuine Radio is Installed) 2 6 9 Part Name and Function 1- Power Switch/Volume Control Knob Rotate the knob to the right to supply electric power (a click sound will be heard when the unit is turned ON). Rotate the knob further to turn up the volume. Rotate the knob in the reverse direction to turn down the volume and the unit OFF. 1 3 8 7 5 4 2- Tone Control Knob M1M7-01-011 Rotate the knob to the right to intensify the treble. Rotate the knob to the left to reduce the treble. 3- Display Time, receiving radio wave frequency, or operation mode is displayed. 4- Clock Button Press this button to display the time.
Repress this button to display the receiving radio wave frequency. 5- Auto-Store/ Scan Preset Button (AST) Press this button to receive the preset frequency station for every 5 seconds sequentially. While you receive the station you wish to listen to, press this button again to receive the station under normal state (scan is interrupted). Press and hold this button for 2 seconds to automatically store the station. 6- Station Preset Buttons (1 to 6) One FM and MW (AM) station per button can be preset using these respective buttons. 7- Seek Button Press this button to automatically seek the next receivable station. When a station is received, the auto- seeking function is deactivated.
8- Band Button Select FM or MW (AM) by pressing this button. The display indicates the receiving station frequency. 9- Tuning Button Tap the TUNE button to increase the frequency. Tap the TUNE button to decrease the frequency. Tap and hold the button to change the frequency continuously. 1-10