OPERATOR'S STATION Station Presetting Procedure 2 6 9 1. Select MW (AM) or FM by pressing BAND button (8). Select a station by pressing either TUNE button (9) or SEEK button (7). 2. Continuously press one of PRESET button (6) by which you desire to preset the station for more than 2 seconds. When presetting is complete, the preset button No. is indicated on the display. 1 3 8 7 5 4 3. Repeat the above same procedure steps (1) and (2) to M1M7-01-011 preset other stations with other PRESET buttons (6). f NOTE: After presetting is complete, if the preset button is pressed again and held for more than 2 seconds, the preset station is changed.
Auto-Storing Press and hold the AST button for more than 2 seconds 2 6 9 with the radio switch ON, preset buttons (1 to 6) automatically search receivable frequency stations in the selected frequency band (AM or FM) and memorize each station in one button. f NOTE: When auto-store operation is made, the preciously 1 3 8 7 5 4 M1M7-01-011 memorized stations are deleted. If it is difficult to set the memory of the desired station to the desired button, conduct preset operation. Preset Scanning Press and release the AST button in 2 seconds with the radio switch ON, preset station frequencies are received one by one for 5 seconds. Press the button again to resume normal radio operation.
Deletion of Preset Memory If the battery power is disconnected such as when the machine is serviced or the radio is removed, the preset memory in the preset buttons will be deleted. Repeat the preset operation again. Clock Setting Procedure In case the frequency is indicated on the display, press the CLOCK button to display the time. While pressing the CLOCK button, press TUNE M button to change the minute display. While pressing the CLOCK button, press TUNE H button to change the hour display. Release the CLOCK button to resume the original mode. While pressing CLOCK button Minute is adjusted Hour is adjusted M1M7-01-012 1-12