OPERATOR'S STATION Opening/Closing Cab Front Window (ZX27-3) d CAUTION: The front window comes down forcefully. Close the front window only when sitting on the operator’s seat. Guide the front window down slowly. 1 Opening: 1. Push in lock switches (1) to unlock the front window. 2. Pull the front window up and back until slide lock switches (1) fall into boss holes and Lock. Closing: 3. To close the front window, perform procedures shown in a. Push in lock switches (1), to unlock the front window steps (1) to (2) in reverse. These are: b. Pull the front window down slowly M1LN-01-007 c. Be sure that the front window is locked 1-14