DRIVING MACHINE Travel Levers Front Travel operation can be performed with the mechanical levers. d WARNING: In the standard traveling position, the front idlers are located in front of the operator’s seat and the travel motors at the rear. If the travel motors are positioned at the front of the machine, when the travel lever’s are operated in the direction as illustrated on the operation decals, the travel direction of the machine will be reversed. Be sure to confirm the position of the travel motors before traveling. Blade Left Right Operator’s Seat f NOTE: Travel lever dampers are provided for smooth control.
In extremely cold weather (lower than -20 °C), the travel lever will become heavy to operate. This is caused by increase in oil viscosity which is not abnormal. Travel Motor Rear M571-01-001 Forward/Reverse Travel Move both levers forward together to travel forward. Pull the levers back together to travel in reverse. The travel speed can be controlled by adjusting the lever operating stroke. Ascending/Descending Slopes The machine gradeability is ZX14-3, 16-3, 18-3: 25° (47%) ZX27-3: 30° (58%). Slowly operate the travel levers when descending a slope. When the travel levers are placed in neutral, the travel brakes are automatically applied to stop the machine.
M1LA-04-001 M1MF-04-001 M104-04-003 Forward/Reverse Travel Direction 4-1