hitachi — Hitachi ZX14-3/ZX16-3/ZX18-3/ZX27-3 Hydraulic Excavator Operator's Manual

DRIVING MACHINE Driving in Water or on Soft Ground 1. If the footing is even and the water slow running, the machine can drive in water up to the upper track shoe surface (A) at the top of the front idler. In case the footing is uneven and the water is flowing fast, be careful not to submerge the swing bearing, swing pinion gears, and/or center joint in water or mud. Operable Water Depth (A) ZX14-3, 16-3, 18-3 370 mm ZX27-3 465 mm 2. The machine may enter deeper areas gradually. Check the machine’s position often. Reposition the machine if necessary. A IMPORTANT:

If the swing bearing, swing gears and center joint are submerged in water or mud by mistake, premature wearing on parts such as the swing bearing may result. Grease must be changed or overhauling will be required immediately. Stop operating the machine as soon as possible, and contact your authorized dealer. M1NC-04-001 4-6