OPERATING MACHINE Control Lever (ISO Excavator Pattern) d WARNING: Be sure to check the location and 1 5 function of each control lever before operating. The upperstructure and/or front attachment may unexpectedly move when attempting to turn and look behind the machine as a part of operator’s body may come into contact with the control lever (s). Take care not to come into contact with the control levers when turning and looking behind the machine. 3 4 7 8 2 6 Labels showing the lever control pattern are provided on the operator’s right. As illustrated below, the labels indicate the ISO Excavator Pattern.
M1MS-05-003 M588-05-050 When a control lever is released, it automatically returns to neutral, stopping the function in that position. 3 4 1- Arm Roll-Out 2- Arm Roll-In 1 3- Swing Left 4- Swing Right 2 M1M7-05-001 5- Boom Lower 6- Boom Raise 6 7- Bucket Roll-In 8- Bucket Roll-Out 8 5 7 M1M7-05-002 5-1