Komatsu — 20.2 COOLANT

COLD WEATHER PRECAUTIONS 20. COLD WEATHER PRECAUTIONS During cold weather, or in regions where temperatures, especially at night, drop signifi- cantly, take the precautions listed below to prevent damage from frost and freezing. 20.1 FUEL AND LUBRICANTS 1 - Change the fuel to winter diesel type ASTM D975 N ° 1. 2 - Change the engine oil for an oil of suitable viscosity. See section 26. «FUEL, COOLANT, AND LUBRICANTS» for the necessary specifica- tions. 20.2 COOLANT DANGER Coolants which contain anti-freeze are inflammable. Do not smoke or use naked flames while carrying out checks or mixing new coolant. Do not use methanol, ethanol, or propanol based anti-freezes.

1 - If no permanent anti-freeze is available, use an ethylene glycol based product with anti- corrosion and anti-foam additives. Only use this type of anti-freeze during the Winter months. When changing the coolant (in the autumn and spring) wash out the coolant circuit. (See section 29.10 «OCCA- SIONAL MAINTENANCE».) 2 - When calculating the required ratio of anti-freeze to water, base your calculations on the coldest temperature recorded in the past and allow for a 10 ° C safety margin. (See sec- tion 25.1.2. «ENGINE COOLING WATER».) 3 - Do not use leak sealing additives either on their own or in conjunction with anti-freeze. 4 - Do not mix different brands of anti-freeze.

5 - If the circuit is filled with a permanent anti-freeze, this need not be changed, and the cir- cuit does not therefore require washing out. 6 - Permanent anti-freeze must comply with SAE-J1034 and FEDERAL STANDARD O-A- 548D standards. Ask the manufacturer for further information if you are in doubt about whether any partic- ular anti-freeze complies with these standards. 83