SCHEDULED MAINTENANCE 29.1 PRE-STARTING CHECKS 29.1.a VARIOUS CHECKS DANGER Dirt, oil, and fuel spillages near hot areas in the engine compartment can lead to engine fires and seriously damage the machine. Check for leaks on a regular basis and repair immediately. Consult your FKI dealer if leaks recur frequently. Before starting the engine, check: 1. That there are no loose nuts or bolts. 2. That there are no oil, fuel, or coolant leaks. 3. The wear on the working equipment. 4. Track tension and wear. 5. The correct functioning of all dashboard warning lights and indicators, working flood- lights, windscreen wipers and horn. Also perform the following safety checks: 6.
Condition and functioning of the safety belt. 7. Completeness and legibility of all safety notices. 8. Cleanliness of access hand grips and cab floor. 29.1.b CHECKING THE COOLANT LEVEL DANGER Never remove the radiator cap to check the coolant level. Wait for the engine to cool and check the coolant level in the expansion chamber. Open the engine bonnet to gain access to the expansion chamber (1). The coolant level should be between the minimum and maximum level marks. If necessary, top up with clean water or coolant. If the coolant level drops significantly every day, check the radiator and engine seals and gaskets. 1 F00843 111