Komatsu — 30.2 PREPARING THE MACHINE FOR USE

EXTENDED PERIODS OF DISUSE 30.2 PREPARING THE MACHINE FOR USE 1 - Unblock the exhaust pipe and fuel filler cap. 2 - Check all fluid levels (engine oil, coolant, fuel, hydraulic fluid). 3 - Make sure that the battery is fully charged, replace and re-connect it. 4 - Disconnect the engine stop solenoid. 5 - Turn the ignition key directly to START position and hold until the low oil pressure warning light goes out. This operation ensures that oil is circulated to all moving parts of the engine before the engine starts. 6 - Re-connect the engine stop solenoid. Start the engine and run at a fast idle for about 15 minutes. 7 - As the engine is warming up, clean the hydraulic rams.

8 - Check that the instruments, warning lights, function indicators, and working floodlights are all working correctly. 9 - As soon as possible, move all the hydraulic cylinders a few times to warm up the hydraulic system. 10 - Drive the machine slowly and test the brakes a few times. 144