Komatsu — 33.2 FITTING THE CLAMSHELL BUCKET

AUTHORISED OPTIONAL EQUIPMENT 11 - Turn the selector lever (6) clockwise as far as it will go. 12 - Grease the joints connecting the clamshell bucket to the arm (see section 29.4.a GREASING THE ARTICULATIONS). Also grease all points on the clamshell bucket requiring lubrication (see the bucket's own technical documentation for details). 13 - Start the engine and lift the clamshell bucket just off the ground. F00730 6 14 - Slowly open, close, and rotate the bucket a few times and check all hydraulic seals for tightness. DANGER Wear thick gloves and safety goggles when searching for leaks in the hydraulic system. Use a piece of cardboard or wood to search for hydraulic leaks, NOT your hands.

154