PRECAUTIONS TO BE TAKEN WHILE WORKING 3.10 PARKING THE MACHINE Always park the machine on firm, level ground. If you have to park on a slope, park the machine facing downhill and take the following precau- tions: 1 - Rotate the bucket into unloading position and lower the boom and arm until the bucket’s teeth dig into the ground. 2 - Switch off the engine. 3 - Place wedges or safety blocks under the tracks. D00051 @@@ AAA ЂЂЂ ЃЃЃ ААА БББ Always lower all equipment to the ground. If for any reason you have to park with the boom and arm raised, engage the necessary locks and safety devices. BBB CCC ‚‚‚ ѓѓѓ ВВВ ГГГ Always disable the equipment control levers by engaging the control lock.
Check that all the cab windows are tightly closed before leaving the machine. Remove the ignition key and lock the cab door. If you have to park on a public road, warn other road users of the hazard in compliance with national laws (hazard warning lights, barriers, roadwork signs, traffic priority signs, deviation signs, etc.). F00858 17