THE CAB AND DRIVING POSITION 15.3 THE DRIVING SEAT The driving seat is extremely comfortable thanks to five different regulations. a - forward/back position; b - backrest angle: c - damping (to absorb vibrations and jerks); d - seat angle; e - headrest adjustment. The driving seat is mounted on sliding rails and can slide forwards and back together with the control levers, dashboard, and switchboards. Adjust the seat to the most comfortable position for your own stature. F00280 To adjust the forward/back position of the driving seat, simply lift lever (1) and slide the seat along its rails.
When the seat reaches the required position, release lever (1) and jog gently in both directions to make sure that the locking pin has engaged a positioning hole. To adjust the position of the backrest, lift lever (2) and move your back to the position you require. The backrest is sprung to follow your movements. To adjust the degree of damping, turn knob (3) while watching the scale on the knob. The ideal setting is achieved when the weight dis- played on the scale corresponds to your own weight. You can set damping as you wish to suit your own preferences. Turn the knob (3) clockwise ( ) to obtain a harder action, or anti-clockwise for a softer action.
To adjust seat angle, lift lever (4) and move the front of the seat to the position you require. There are four possible settings. The headrest can also be adjusted in height and angle to suit the individual operator. The driving seat is fixed to the guide rails of the operating controls. Both the seat and the controls can therefore slide together. 2 4 3 5 1 F00842 65