OPERATING THE MACHINE 16.5.2 NEGOTIATING SLOPES DANGER Check the efficiency of the working brake before starting work on a slope. Avoid using the speed control pedal when working on slopes. Work on slopes requires special precautions to avoid danger to yourself and to other persons in the vicinity. Proceed as follows when working on slopes. 1 - Examine the work area and take note of any snow, mounds, gravel or loose earth which might affect working conditions or machine stability. 2 - When driving down a slope, keep the bucket downhill from the machine as shown in the fig- ure. 3 - When driving up a slope, keep the bucket uphill from the machine.
4 - Keep the bucket as low as practically possible when moving the machine around the work site. 5 - Cross slopes at the top or at the bottom. If this is not possible, make a number of small diago- nal movements across the slope, keeping the machine as parallel as possible with the direc- tion of the slope. Never drive across slopes at sharp angles, or worse still straight across them. D00054 @@@ ЂЂЂ ААА @@@ ЂЂЂ ААА D00055 @@@ AAA CC ЂЂЂ ЃЃЃ ѓѓѓ ААА БББ ГГГ BBB ‚‚‚ ВВВ ѓѓѓ ГГГ BBB ‚‚‚ ВВВ CC 76