. OPERATION OPERATION 3 - 122 ARTICULATING MACHINE DURI Do not carry out operations machine is articulated, the dir ection of force will be different f or the front wheels and rear whe traveling will not be transmitt els. As a result, the power ed fully to the front wheels, so thi when s will reduce the digging force and bring an excessive load to be ar on the center hinge pin. In addi tion, even with the front wheels , the power will not be transmitted uniformly to the left and right wh eels.
The load will be brought to b ear on one wheel, so this will re duce the service life of the tire on If digging work is carried o overall stability of the machin e will be poor and there is dang er of the machine tipping over. When carrying out operations , do not articulate the machine. Drive straight forward and thrust th e bucket in. If this is done, the lo ad on the bucket will be uniform, s o this makes it possible to avoid load on one side and makes it ea BUCKET DUMP ANGLE WHEN DIGGING OR LOWERING ROADBED Do not set the cutting edge of the bucket at a large angle t ground surface when digging or lowering the roadbed.
Keep angle (a) between the bucket and the ground surface to a maximu m of 8 °. If angle (a) between the cutting edge of the bucket an ground surface is more tha n 8° when digging or lowerin roadbed, there is danger of d amage to the work equipment.