Komatsu — WORK POSSIBLE USING WHEEL LOADER

. OPERATION OPERATION APPROACHING DUMP TRUCK WARNING engine speed, pedal depress dump truck. If the engine in poor fuel 3 - 131 Do not op erate the steerin g suddenly when the bucket is raised. If the steering is operated when th e bucket is raised, th ere is danger th at the machine m ay tip over and cause serious p NOTICE Do not shift down with the accelerator pedal depresse d (with the engine speed raised). If the tra nsmission is shifted down when t he engine speed i s high, there will be an excessiv e load on the engine, torque converter, tran smission, axles, final drive, and the whole power tra in. In addition, the tires will slip and this will cause wear of the tires.

Do not operate the stee ring immediately after switching between forward and reverse (when the m achine is stationary). If the steerin g is operated wh en the machine is stationary, it will cause wear or cuts to the tires. If a tran smission cut-of f system is installed, turn the tr ansmission cut-off switch to the OFF posit ion and depress the brake, but do not raise the bu cket. In this condition, the brak e is operated, so heat is generated in the b rake chamber and th is will cause heat fatigue to pa rts inside the axle. 1. Let t he accelerator pedal back to reduce the e then depress the pa rking brake pedal to stop th 2. Shift gear from R2 t o F2. 3.

Oper ate the steerin g to set the load that at right dum p truck, then dr ive forward. REMARK Operate the steering in the following order: let acc switch between forward and revers tor pedal to drive forward → approach d back → switch betw accelera tor pedal to d these op erations are carried out at the same tim tion will be poor and this will result tion. accelera consump 4. Rais e the bucket to adjust the bucket height so buck hit th et is tilted dow n, the cutting edge of the bu e bottom face of the dump body or the dilu