. OPERATION OPERATION INSTALLING THE BUCKET in the 4, align the pin holes, to the dust seal when 3 - 140 Before installin g the bucket, rem ove all grease, mu d, or sand and clean the pin, pin hole, and area around the boss (If there is any rust or dirt on th e inside surface of the pin ho le, us e sandpaper and remove it car After cleaning, coat the pin and inside surface of the pin hol e with fresh grease 1. Set cord ri diagram. After comp leting assembly of the bucket and adjustmen shims in st ep 8, move the c ord ring down to t he groove. 2. Coat dust s eal lip portion (3 ) with grease. 3. Align the le ft and right buck 4.
cleara bucket hing e boss (4) and li ft arm boss (1) are less than 1.5 mm (0. 5. Assemble the shims select then insert bucket hinge pin Coat with grease to preven t damage inserting th e bucket hinge p Use a buck et hinge pin that has a grease hol