. OPERATION TROUBLESHOOTING PROCEDURE FOR CONNECTING EMERGENCY START CONNECTOR (A) Wiring harness at machine end REMARK 3 - 171 1. Insid e the right conso le box aroun d the prelube controller, there are 3 -pole c onnectors (2 each) with tags saying "PRE1" and " PRE2". Th e two "PRE1" conn ectors are connected to each each othe othe (B) W iring harne ss at c 2. When starting th e engine without carrying out t he prelube operation, remov e the t wo sets of co nnectors and connect t he PRE1 and PRE2 connectors in their place. o the START position to 3. Turn the k ey in s tartin o the START to crank the prelube operation.
Even when startin g the engine withou t carrying out the prelube operation, when s tarting in cold area s, turn the key in switch When (1) t the o the ON position and carr preheating pilot lamp go y out preheating es out, turn the startin g switch (1) to the START posi tion and start the engine.